Your pellet stoves does not turn on? Possible causes and solutions

If you are delighted with your pellets stoves, but it suddenly stopped working, you may have panicked.

Especially if you live in a place where the cold seems to have set in and doesn’t want to leave.

Today in this article we want to help you to detect and solve some of these problems so that your pellet stoves continues to work optimally.

Remember, however, that many of these problems will need to be dealt with by maintenance professionals in order to follow the manufacturer’s instructions.

Let’s review it.

Main faults or mistakes your pellet stoves can make

If your pellets stove has stopped working, it is probably due to some of the most common faults that occur in this heating system.

Some of these fall into the following groups:

• Electrical problems.
• Mechanical problems.
• Problems with pellets.
• Ventilation problems.
• Or maintenance problems.

At first glance they may not tell you much, but we will be uncovering them later on so that you can catalogue the problem with your pellet stove and make it easier for the professional who will be in charge of helping you repair it.

Are there any issues with the turn power up process in your pellet stove?

If your pellet stove does not start, the first thing to do is to check if the ignition system is working properly.

Check the manufacturer’s instructions to see if there is a reset mode available or if you need to contact the official service centre.

But under no circumstances try to fix it yourself, if the ignition system cannot be reset.

Here are the most common reasons why the pellet stove does not ignite.

Now, let’s look at the most common causes why your stove may not be working properly.

• Pellet stoves without power: Make sure that the pellet stove is connected to a power source and that there are no electrical problems.
• An alarm goes off on the control panel: Consult the manufacturer’s manual to interpret the alarms and take the necessary actions.
• The stoves door does not close properly: Check that the door is properly closed, as an improperly closed door can prevent ignition.
• No pellets in the hopper: Make sure that the pellet hopper is filled to the manufacturer’s specifications.
• The auger does not rotate correctly: The auger is responsible for moving the pellets into the combustion chamber. Check if it is working properly.
• The ignition resistor does not heat properly: The resistor must reach the right temperature to ignite the pellets. If it does not, it may be defective.
• Problems caused by the pellet:
  • Pellets do not have enough air: Make sure there is sufficient air flow.
  • Pellets are wet: Pellets must be dry to burn properly.
  • Poor pellet quality: Use good quality pellets to avoid ignition problems.
• There is a blockage in the smoke outlet: Check if the smoke outlet is clear to ensure good ventilation.
• Lack of maintenance and cleaning: Perform regular maintenance and cleaning of the stove to avoid accumulation of residues that may affect ignition.

Step-by-step for a basic check and troubleshooting of the pellet stoves

After reading about the most common causes of pellet stoves, you may be asking yourself: fine, but how do I know which one is wrong with my pellet stoves?

It’s time for a basic check that even you can do to make sure you see the problem with your stove.

To do so, follow these steps:

• Check if there is power: Check that the stove is correctly connected and that there are no problems with the power supply.
• Check that the pellets are dry: Damp pellets can prevent ignition. Make sure they are stored in a dry place.
• Check that the ignition resistor is working properly: The resistor must reach the right temperature to start combustion. If you do not know how to do this safely, contact a professional.
• Check that the exhaust fan and convection fan are working: Make sure that both components are operational for efficient operation of the stoves.
• Check that the door closes properly: This may seem silly, but the reality is that a poorly closed door can affect the ignition and overall operation of the stoves. So make sure it closes smoothly and there is nothing in the way.

How to reset a pellet stoves?

If your pellet stove has a reset function, it is important to follow the instructions in the manufacturer’s manual for this operation.

Resetting can solve some minor problems and restore the stove to normal operation.

However, if problems persist, it is advisable to contact the official technical service.

Why? Because pellet stove maintenance companies are the ones who know the product. Because pellet stoves maintenance companies are the ones who know the product and who can make sure to make a diagnosis that really solves your problem.

But remember that regular maintenance of your pellet stoves not only prevents failures, but also ensures that you can enjoy a longer life and greater efficiency.

Therefore, always, always follow the manufacturer’s recommendations and hire a specialised maintenance service to keep your stoves in perfect condition.