Doubts about biomass?
Pellets are little cylinders usually with a lenght of 6-8 mm made with wood waste without any type of additives and with an humidity of less than 10%.
The pellet price is stable unlike petrol or gas.
Pellets are made from wood waste and normally they are consumed in the same area of production, promoting in this way the cleaning of forests, local employment and wealth.
Pellets have high calorific power.
Pellets don’t produce odors.
Pellets have a lower CO2 footprint and emission, helping on the reduction of greenhouse efect.
The essential requirement for the storage of pellets is that they need to be on a dry location. Fulfilling this requirement the pellets can be stored in 15kg bags, in rigid, textil or buried silos.
It is required to install a flue between the pellet stove/boiler and the outside air (usually with a diameter of 80 or 100 mm), made of stainless steel pipe, and with at least two meters of vertical pipe to create natural draft in case of power failure. The flue pipe must not be installed with any other kind of shared pipeline, such as another stove or other heating system flue.
A pellet stove can be installed in a flat, but it will always be necessary to ask the community for permission and to approve it unanimously, as well as to respect the installation norms indicated in the R.I.T.E code.
For a good performance of your stove it is essential to carry out cleaning and maintenance operations. The user must vacuum the ashes from the burner, empty the ashtray drawer, clean the glass of the door. It is mandatory to do a general maintenance once a year or every 500 kilos of burned fuel, this should be done by a qualified technician, in which, among other things, he must clean the exhaust pipe of gases, ashes in the extractor and review pipe joints.
The air heaters expel warm air through the front of the machine, to heat all the space where the machine is located. The ducted air heaters carry heat to other rooms through ducts and can heat several rooms at the same time. The hydro stoves have an hydraulic system and connects to a heating wet system (radiators, underfloor heating …)
Yes. A gas or fuel boiler can be replaced by a pellet boiler, taking Not all pellet stoves and boilers can use several types of fuel. All Ecoforest stoves are polycombustible, you can use pellets, olive stone or almond shell.
Not all pellet stoves and boilers can use several types of fuel. All Ecoforest stoves are polycombustible, you can use pellets, olive stone or almond shell.
In equal conditions of heat production, the pellet costs less than fossil fuels (around 25% less than natural gas and 2 times less than diesel) and its price has not suffered over the years the same oscillations that have affected fossil fuel derivatives. Therefore, changing to a pellet heating system it’s clearly an smart choice.
Frågor angående värmepumpar?
En värmepump är en apparat som kan använda en källa med en stabil temperatur för att via en termodynamisk cykel användas för att uppvärmning, tappvarmvatten (VV) och kyla.
På det viset är värmepumpen ett system som växlar temperaturer mellan energikällan och huset. Marken, sjön, berget eller uteluften kan ses som värmepumpens primära energikälla och är det som klassificerar värmepumpen som t.ex. bervärmepump, luft/vatten värmepump m.m. Dessa energikällor växlas sedan mot byggnadens produktionskrets vare sig det är uppvärmning, kyla, pooluppvärmning, tappvarmvatten (VV) eller annat.
Geothermal energy is defined as energy stored in the form of heat in the ground below the surface, therefore, it englobes the heat stored in rocks, soil and groundwater, whatever its temperature, depth and origin. Geothermal resources are classified as the portion of geothermal energy that can be used by man. These resources are classified according to their temperature level: high temperature (above 150 ° C), medium temperature (between 150 and 130 ° C), low temperature (between 100 and 30 ° C) and very low temperature (lower than 30 ° C).
Therefore, geothermal energy is a source of renewable energy that can be used directly for heating or electricity production, and indirectly as a high efficiency energy source for heat pump application.
A geothermal heat pump uses the ground as his source of energy. This energy can be captured using an array of pipes in a closed system buried underground horizontally, vertically (borehole) or even sinked in the water, or in a open system pumping the ground water through a heat exchanger.
Compared to aerothermal systems, the main advantage of geothermal heat pumps is it’s performance. The efficiency of these systems is greater due to the ground stable temperature, this stability increases with the ground depth, which guarantees a higher performance and efficiency of the heat pump.
All Ecoforest geothermal heat pump range have the ecoGEO designation. These heat pumps, both the domestic and high power range, are compatible with all types of geothermal energy source, hybrid solutions of aerothermal and geothermal energy sources and only aerothermal energy source. Likewise, all of the range is capable of producing heating (underfloor heating, radiators and fan coils), cooling (active and passive), DHW and pool.
All ecoGEO heat pumps use Inverter technology, which allows them to modulate their power, adapting themselves in real time to the demands of the installation with the highest efficiency. This translates, evidently, into a very considerable reduction of the consumption of electricity, not only due to the high efficiency, but also due to the technology and the control strategies developed by Ecoforest. The installation of the ecoGEO heat pumps also becomes much simpler, more compact and more economical than those of other heat pumps on the market, because the ecoGEO heat pumps incorporate much of the components that are necessary in a traditional heat pump installation.
Aerothermal energy is defined as energy stored in the form of heat in ambient air. The air, even at low temperatures (in winter), is a source of energy that can be used by a heat pump. These systems use outdoor units to extract the environmental heat that the heat pump uses as primary source.